2019年5月31日星期五

Morphology of Molecular Assembly


Amphiphilic peptides have a hydrophilic head group and a hydrophobic alkyl tail. The hydrophobic tail helps in aligning the head group to form various secondary, supersecondary, and tertiary conformations. Very thin cylindrical nanofibers (<10-nm diameter) with high aspect ratio, or nano belts, are achieved by a self-assembly of peptide amphiphiles (PAs) under specific solution conditions (pH, ionic strength, and temperature). The 1D nanostructures can interact further among one another, making a 3D network. These 3D network structures make a hydrogel in water. Hydrophobic and electrostatic interactions are the dominating forces in the self-assembly of amphiphilic peptides. The amphiphilic cyclic peptide composed of two b-glucosamino acids and one trans-2-aminocyclohexylcarboxylic acid in formic acid and water (7/3 v/v) makes self-assembled rods and fibers of different dimensions depending upon the solution concentration. A concentration of 1.1 10 5 M provided a rod-shaped assembly of c. 5-nm diameter, which corresponds to a nine-columnar (3 triple bundle) structure (Fig. 4.7A). By increasing the peptide concentration to 1.1 10 4 M, a uniform fibrous assembly of c. 15 nm in

2019年5月28日星期二

Nano-microfiber Composites For Filtration

Nanofibers prepared by molecular self-assembly are in general not self-supporting and therefore require stabilizing scaffold structures. In fact, a lot of research in the past has been done with su pramolecular self-assembly of molecules forming a network of nanofibers used as organo/hydro gelators. But efforts to use them as a self-standing membrane or as free fibers were not strong. Therefore, the self-assembly of trisamides was also tried on a substrate, i.e., other microfiber non wovens, leading to microenanofiber composites (Fig. 4.4) used for filtration (Weiss et al., 2016).

2019年4月29日星期一

Polymer/Carbon Nanotube Composite Nanofibers


To improve the compatibility between CNTs and polymers, the surface functionalization of CNTs has been developed (Kharaziha et al., 2014; Molnar et al., 2008; Ra et al., 2005; Mazinani et al., 2009; Yee et al., 2012; Subagia et al., 2014; Diouri et al., 2014). For instance, Kharaziha et al. established a simple strategy to prepare electrospun gelatin/CNT composite nanofibers by using carboxyl acid groupemodified CNTs, and the well-dispersed CNTs aligned along the fibrous axis could be observed (Fig. 3.15B). This work demonstrated CNTs as a component of tough and flexible scaffolds with outstanding electrical properties (Kharaziha et al., 2014). Molnar et al. (2008) synthesized PVA/CNT composite nanofibers with diverse types of CNTs and different functional groups via electrospinning. Furthermore, other synthetic methods such as electrospinning combined with electrospraying and a surface adsorption approach have been developed as well (Xuyen et al., 2009; Kim et al., 2006b; Vaisman et al., 2007; Dai et al., 2011; Rana and Cho, 2011).

2019年4月28日星期日

Polymer/Fe3O4 Composite Nanofibers


Magnetic NPs have been receiving increased attention with the rapid development of nanotechnology.Among them, Fe3O4 NPs have caused widespread interest owing to their high superparamagnetism as well as facile preparation. Their easy oxidation and resulting decline in magnetic property is a problem, however, which is effectively solved by the dispersion of Fe3O4 NPs in polymer nanofibers. The simplest way to prepare polymer/Fe3O4 composite nanofibers is to disperse Fe3O4 NPs in the polymer solution and subsequently carry out the electrospinning process. Xin et al. successfully fabricated poly(p-phenylene vinylene)/Fe3O4 composite nanofibers via electrospinning of a precursor solution and subsequent thermal conversion (Fig. 3.14A). In addition, the aligned nanofibers can be obtained by employing two parallel magnets as the collector. A variety of polymer/ Fe3O4 composite nanofibers, including PAN/Fe3O4 composite nanofibers, gelatin/Fe3O4 composite nanofibers, etc., have been reported by means of a similar method, and their potential applications in various fields have been studied as well.

2019年4月25日星期四

METAL NANOFIBERS


Metal nanomaterials possess unique physical and chemical properties and certain special functions compared with many other functional nanomaterials. Electrospun metal nanofibers show excellent thermal stability and conductivity and possess potential applications in photoelectricity, sensors, high temperature filtration, and other fields (Bognitzki et al., 2006; Hsu et al., 2012; Shao et al., 2011; Zhang et al., 2016c; Wu et al., 2007; Hansen et al., 2012). In 2006, Bognitzki et al. successfully prepared Cu nanofibers through a strategy involving an electrospinning technique followed by calcination in an air and H2 atmosphere. It was the first time that electrospun Cu nanofibers had been reported (Bognitzki et al., 2006). Later, Hsu et al. coated a passivation layer on electrospun Cu nanofibers (Fig. 3.12A). The results showed that the treated sample possessed superior durability as well as resistance over the bare Cu nanofibers. It is anticipated that the product can be applied as stable transparent electrodes (Hsu et al., 2012).

2019年4月20日星期六

ZnO Nanofibers


The potential applications of electrospun ZnO nanofibers have been widely studied. For example, Zhang et al. (2009b) fabricated uniform ZnO hollow nanofibers and investigated their gas-sensing activity against ethanol. Similarly, Wei et al. (2011b) studied the performance of electrospun ZnO hollow fibers as an acetone gas sensor. Katoch et al. (2016a,b) measured the influence of hole diameter as well as crystallinity in ZnO hollow nanofibers on the gas-sensing property.

2019年4月17日星期三

FexOy (Iron Oxide) Nanofibers


It is generally known that iron oxides mainly contain Fe2O3 and Fe3O4. Fe2O3 is stable in air, and possesses potential applications in adsorption, sensors, electrochemical catalysis, and other fields. On the other hand, Fe3O4 is a typical kind of magnetic material, which can be applied in magnetofluid as well as magnetic recording materials. Fe2O3 nanofibers with uniform structure can be easily prepared via an electrospinning technique followed by a calcination treatment (Fig. 3.6A). For example, Gao et al. prepared hollow a-Fe2O3 nanofibers via such a strategy and developed their potential in dye adsorption. Similarly, Nalbandian et al. found that electrospun Fe2O3 nanofibers possess promising prospects in heavy metal removal. Guo et al. studied the effect of the structure of electrospun Fe2O3 nanotubes on gas sensing; the results indicated that porous a-Fe2O3 nanotubes exhibited remarkably enhanced performance for acetone sensing over hollow a-Fe2O3 nanotubes. g-Fe2O3 nanofibers have also been successfully synthesized and their properties as acetone gas sensors have been found as well.